Efficiency Increases Dramatically

In wet and dry booths, the Pre-Baffle System captures approximately 80% of the overspray, particulate emission is immediately reduced by that amount.  The bar chart below graphically show these improved results.  In any standard booth, the 96% efficiency and emitting 7.9 grains of particulate per 1000 cfm, can be improved to 1.58 grains with the addition of the patented Pre-Baffle System.  In gallons per year, this translated into 312 gallons without the Pre-Baffles and only 62 gallons after the Pre-Baffles are installed.  A big difference, especially considering the cost of sludge removal or filter replacements.

Environmentally speaking, the amount of emissions not only keep the atmosphere cleaner, but your exhaust system and stacks stay cleaner as well, further reducing maintenance costs.  Then too, your customers, suppliers and employees will appreciate the reduction of particulate setting on their vehicles.

Better Spray Booth Performance

The design, with its vertical air openings, provides from floor to ceiling, uniform movement of air through the booth, ensuring that your spray pattern will reach the upper sections of your parts, and giving you effective, uniform exhausting of overspray and contaminants.

In water wash spray booths, performance is also improved because less particulate enters the water wash area, so your nozzles will not clog up, giving you batter scrubbing action.  And, of course, less sludge improves the overall performance of the booth.

Dry type paint booths perform better because the filters work more efficiently for longer periods of time.  Less overspray is available to clog the filters and the uniform sir pattern spreads the remaining overspray evenly across the entire filtered area instead of letting it concentrate on one segment of filtered area.  Thus, filter changes are not required as often, giving you greater productivity.

Pre Baffle Systems

800-913-8335

630-285-8335

email: info@prebaffle.com